SSCOR QUICKDRAW® - Alkaline Battery PoweredPowerful suction designed to fit in your ”first in kit”
Canister & Battery Options
Hose - Barbed Canister (2488)
The barbed Quickdraw canister allows the device to be used like a “traditional” suction device. The Quickdraw is placed by the patient and the patient tubing and suction catheter are connected to the barbed fitting on the canister. Disposable, one time use.
The Quickdraw canister features a 2 position regulator. When capped, the Quickdraw delivers over 500mmHg negative pressure. When the regulator vent is opened, the negative pressure is reduced to approximately 80-100mmHg allowing the device to be used for tracheal and pediatric suction procedures.
AAA Battery Holder (80615-100)
The AAA battery holder accepts ten (10) standard off-the-shelf AAA alkaline batteries and at full capacity will power the Quickdraw for 60-100 minutes. After the batteries have been discharged, they can be easily replaced with 10 new off-the-shelf AAA alkaline batteries for another 60-100 minutes of power. The AAA battery holder will also accept 10 NiMH batteries and at full capacity will power the Quickdraw for 60-100 minutes.
Alkaline Battery Pack (80613-100)
The alkaline battery pack will run the Quickdraw for 3 hours
The first medical aspirator to be powered by alkaline battery technology.