SSCOR Battery Care
For best results, the SSCOR VX-2 with Charging/Retention Bracket must be reconnected to the charging/retention bracket after each use and remain on charge until needed. Disconnect only for portable use.
The primary method of charging the VX-2 is using the charging/retention bracket. The bracket is designed to be hard-wired to the vehicle power. When the VX-2 is placed in the bracket, the bracket both runs and charges the unit.
There are additional charging options for the VX-2:
Red, yellow and green LEDs on the control panel of the unit indicate the level of charge on the battery:
Check the condition of the battery frequently, see the battery test on page 6 of the owners manual. Consult the owners manual for complete battery information.
SSCOR Batteries
Each component in the VX-2 is critical for delivering effective vacuum when you need it. You can count on the VX-2 to give you the airway clearing suction that you need.
Each part in the VX-2 aspirator has been carefully chosen and tested for reliability.
Each VX-2 comes with a SSCOR labeled battery that has been chosen for this purpose.
When you need to replace the battery, which we recommend that you do every three years, we recommend that you replace it with a SSCOR labeled battery.
Reliable, dependable, that is our SSCOR standard.
SSCOR Inc. | 11064 Randall Street, Sun Valley, CA 91352 | T 818-504-4054 | Email: sales@sscor.com
Images and content of this site are copyright 2023 SSCOR, Inc. All rights reserved.